Hambini Racing BSA Bottom Bracket 30mm Long Axle
£291.00 Ex. VAT
This bottom bracket is designed to interface a 30mm Long Axle (90.5mm DBCA) with a bike frame that uses a BSA Bottom Bracket
Out of stock
Description
- BSA 68mm Threaded (1.37 x 24TPI), Often referred to as English, BSC or ISO threading.
- Drive side has a Left Handed Thread, Non Drive Side has a Right Handed Thread
- 30mm Long Axle (90.5mm+ DBCA) compatible
- The drive and non drive sides are aligned via an internal male/female sleeve
- Top of the range 6806Â SKF/NTN/FAG/NSK bearings fitted as standard
- Non contacting Seals
- It is extremely important that any frame this BB is fitted to has a flat face (0.02mm) that is perpendicular to the threads. Diameter of 52mm
- Tightening Torque of 8Nm (BSA Bottom brackets will self tighten)
- Fitting instructions are here,
- The fitting tool to install this is available hereÂ
This bottom bracket features the largest bearings of any commercially available unit for 30mm axles. They are standard 6806 bearings which have a load rating that is significantly higher than the 4030 bearings used by other manufacturers.
The 24mm variant of this bottom bracket was featured in this video. The unit featured in the video was silver, the production unit is black.
Installation and service video is shown below
Additional information
| Crankset Type | |
|---|---|
| Frame | |
| Manufacturer |
6 reviews for Hambini Racing BSA Bottom Bracket 30mm Long Axle
Q & A
Metal.
It's to do with the axle type not the diameter. Historically BB30 or 30mm axles have been 68mm DBCA. This type would not fit. Modern 30mm cranksets use a 90+mm DBCA and these are referred to as long axle.
It will providing the Hope Cranks have a DBCA of 90.5mm or above
If you have the choice, the 24mm Rotor crankset with the Hambini to Shimano BSA BB is superior.
90.5mm DBCA
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Racer 500 –
Swapped a c bear out for one of these. No contest, the 5 year old is definitely the king.
Conor –
Very solid
Daniel Dragic –
Smooth like butter!
Carlos P. –
Derek Brown –
Solid construction and excellent quality bearings
Adrian Lee –
Looks like a nice piece of engineering but Ive not yet installed it in a bike as the frame is still being built for me.