Hambini Racing T47A T47-77 BBrighT-47 Bottom Bracket 30mm (Cervelo, Factor, FELT)
£275.00 Ex. VAT
This bottom bracket is designed to interface a 30mm Crankset (minimum DBCA of 90.5mm) with a bike frame that uses a T47A Bottom Bracket. This is often called threadfit, BBrighT-47 or T47A and is often found on Cervelo, Factor and Felt bikes.
Out of stock
Description
This bottom bracket is designed to interface a 30mm Crankset (minimum DBCA of 90.5mm) with a bike frame that uses a T47A Bottom Bracket. This is often called threadfit, BBrighT-47 or T47A and is often found on Cervelo, Factor and Felt bikes.
- T47 Threaded. 47×1.0mm
- Drive side has a Left Hand Thread, Non Drive Side has a Right Handed Thread
- Designed for 30mm Axles with a 90.5mm DBCA
- The drive and non drive sides are aligned via an internal male/female sleeve
- Top of the range 6806 SKF/NTN/FAG/NSK bearings fitted as standard. Fully contacting seals are available as a no cost option (use the order notes box)
- This bottom bracket has been designed to offer easy servicing, it is not a throw away item, it has been designed to allow easy changing of bearings which are a standard part
- Non contacting Seals
- Tool Requirements, these are shown on the drawing in the picture gallery
- 52mm Outside Diameter
- 12 Notches
- 51.7mm PCD (Pitch Circle Diameter) R25.85mm
- 3.5mm notch diameter
- A suitable tool is available here
Additional information
| Crankset Type | |
|---|---|
| Frame | |
| Manufacturer |
1 review for Hambini Racing T47A T47-77 BBrighT-47 Bottom Bracket 30mm (Cervelo, Factor, FELT)
Q & A
You'd need to take this up with Rotor. The body dimensions are shown in the diagram.
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Stuart Gregg –
My 2nd Hambini BB, ensures perfect alignment in T47 frames. I ordered mine with full contact bearings as it’s for a gravel bike. I 100% recommend both the Bottom Brackets and customer service.