Showing 1–12 of 18 results
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB30 Bottom Bracket (42mm Nominal Inside Diameter x 68mm wide).
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB86 Bottom Bracket (41mm Nominal Inside Diameter x 86.5mm wide).
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a PF30 Bottom Bracket (46mm Nominal Inside Diameter x 68mm wide).
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB30 Bottom Bracket (42mm Nominal Inside Diameter x 68mm wide).
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB30A Bottom Bracket (42mm Nominal Inside Diameter x 73mm wide). This type of Bottom Bracket is almost exclusively used on Cannondale bikes (CAAD and Synapse).
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB30A83 Bottom Bracket (42mm Nominal Inside Diameter x 83mm wide). This type of Bottom Bracket is almost exclusively used on Cannondale bikes (Topstone). The center section of this bottom bracket is extremely narrow to allow it to miss the cable guide on Topstone bikes.
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset with a bike frame that uses a BB65 Bottom Bracket (These are used exclusively on Look bikes).
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 MTB Crankset (Deore, SLX, XT, XTR) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BB92 Bottom Bracket (41mm Nominal Inside Diameter x 92mm wide).
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a BBRight Bottom Bracket (46mm Nominal Inside Diameter x 79mm wide). This type of Bottom Bracket is almost exclusively used on Cervelo and Factor bikes.
This bottom bracket is designed to interface an MTB Shimano 24mm Hollowtech 2 Crankset with a bike frame that uses a BSA Bottom Bracket.
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset with a bike frame that uses an Italian Bottom Bracket (70mm). This is a popular bottom bracket used on Pinnarello Bikes
This bottom bracket is designed to interface a Shimano 24mm Hollowtech 2 Crankset (Sora, Tiagra, 105, Ultegra, Dura Ace) and Shimano Compatible (Some ROTOR and FSA) 24mm Cranksets with a bike frame that uses a PF30 Bottom Bracket (46mm Nominal Inside Diameter x 68mm wide).
End of content
End of content
No products in the cart.