Hambini BB30 PF30 BB386 Bottom Bracket installation and Removal Kit

(73 customer reviews)

£50.00 Ex. VAT

This kit allows the easy removal and installation of all BB30 bottom brackets. The removal tool will work on all BB30 bottom brackets which conform to 6806 bearing standards. It will also work on PF30/BB386EVO/BBright bottom brackets which do not have a lip integrated into the cup – this varies between manufacturers.

Out of stock

Join the waitlist to be emailed when this product becomes available

SKU: TOOL-BB30PF30-REMOVEINSTALL Category:

Description

Bearing Press Tool BB30/PF30

  • Machined Delrin installation adaptors/plates.
  • Small recess chamfer to prevent the wrong part of the bearing being pressed.
  • Dimensions and tolerances as specified by major bearing manufacturers SKF, NTN, FAG and INA
  • Uses M12 studbar in grade 12.9 (19mm nuts). This standard is much stiffer, stronger and more robust than other presses that use M10 (17mm nuts) stud bar
  • Entire Tool is rated to 755kg of clamping force. Most bike bearings are installed with 40-50kg of clamping force.
  • This Hambini tool pushes both bearings in at the same time. Some other tools push bearings in one at a time, this places an extreme stress on the corner of the bottom bracket shell and can cause cracking of the frame (especially if you have carbon). The Hambini Tool uses the recommended installation method of SKF, NTN, FAG.
  • Designed and manufactured in the UK by Hambini

Bearing Removal Tool BB30/PF30

  • Works with all BB30 bike frames and PF30 bottom brackets WHICH DO NOT HAVE AN INTERNAL LIP. It will also remove the bearings only from BB386 bottom brackets
  • Requires no hammers to remove the bearings
  • Controlled process, does not shock the bike frame with hammer blows
  • Uses M12 studbar in grade 12.9
  • Carbon steel puller
  • Machined Delrin sleeve
  • Rated to 120kg of pulling force. Most bike bearings are installed with 40-50kg of retention.
  • Will remove seized bearings
  • This part IS NOT Galvanized so it may attract surface corrosion.
  • Designed and manufactured in the UK by Hambini

This kit is unsuitable for the installation of a Hambini BB, the M12 rod is not long enough.

This kit contains sharp components. Please take suitable precautions by wearing appropriate Personal Protective Equipment such as gloves and safety glasses.

The videos below show the tools in action.